In [1]: import pandas as pd
Data used for this tutorial:
  • This tutorial uses the Titanic data set, stored as CSV. The data consists of the following data columns:

    • PassengerId: Id of every passenger.

    • Survived: This feature have value 0 and 1. 0 for not survived and 1 for survived.

    • Pclass: There are 3 classes: Class 1, Class 2 and Class 3.

    • Name: Name of passenger.

    • Sex: Gender of passenger.

    • Age: Age of passenger.

    • SibSp: Indication that passenger have siblings and spouse.

    • Parch: Whether a passenger is alone or have family.

    • Ticket: Ticket number of passenger.

    • Fare: Indicating the fare.

    • Cabin: The cabin of passenger.

    • Embarked: The embarked category.

    To raw data
    In [2]: titanic = pd.read_csv("data/titanic.csv")
    
    In [3]: titanic.head()
    Out[3]: 
       PassengerId  Survived  Pclass                                               Name  ...            Ticket     Fare  Cabin  Embarked
    0            1         0       3                            Braund, Mr. Owen Harris  ...         A/5 21171   7.2500    NaN         S
    1            2         1       1  Cumings, Mrs. John Bradley (Florence Briggs Th...  ...          PC 17599  71.2833    C85         C
    2            3         1       3                             Heikkinen, Miss. Laina  ...  STON/O2. 3101282   7.9250    NaN         S
    3            4         1       1       Futrelle, Mrs. Jacques Heath (Lily May Peel)  ...            113803  53.1000   C123         S
    4            5         0       3                           Allen, Mr. William Henry  ...            373450   8.0500    NaN         S
    
    [5 rows x 12 columns]
    
  • This tutorial uses air quality data about \(NO_2\) and Particulate matter less than 2.5 micrometers, made available by openaq and using the py-openaq package. The air_quality_long.csv data set provides \(NO_2\) and \(PM_{25}\) values for the measurement stations FR04014, BETR801 and London Westminster in respectively Paris, Antwerp and London.

    The air-quality data set has the following columns:

    • city: city where the sensor is used, either Paris, Antwerp or London

    • country: country where the sensor is used, either FR, BE or GB

    • location: the id of the sensor, either FR04014, BETR801 or London Westminster

    • parameter: the parameter measured by the sensor, either \(NO_2\) or Particulate matter

    • value: the measured value

    • unit: the unit of the measured parameter, in this case ‘µg/m³’

    and the index of the DataFrame is datetime, the datetime of the measurement.

    Note

    The air-quality data is provided in a so-called long format data representation with each observation on a separate row and each variable a separate column of the data table. The long/narrow format is also known as the tidy data format.

    To raw data
    In [4]: air_quality = pd.read_csv(
       ...:     "data/air_quality_long.csv", index_col="date.utc", parse_dates=True
       ...: )
       ...: 
    
    In [5]: air_quality.head()
    Out[5]: 
                                    city country location parameter  value   unit
    date.utc                                                                     
    2019-06-18 06:00:00+00:00  Antwerpen      BE  BETR801      pm25   18.0  µg/m³
    2019-06-17 08:00:00+00:00  Antwerpen      BE  BETR801      pm25    6.5  µg/m³
    2019-06-17 07:00:00+00:00  Antwerpen      BE  BETR801      pm25   18.5  µg/m³
    2019-06-17 06:00:00+00:00  Antwerpen      BE  BETR801      pm25   16.0  µg/m³
    2019-06-17 05:00:00+00:00  Antwerpen      BE  BETR801      pm25    7.5  µg/m³
    

How to reshape the layout of tables?

Sort table rows

  • I want to sort the Titanic data according to the age of the passengers.

    In [6]: titanic.sort_values(by="Age").head()
    Out[6]: 
         PassengerId  Survived  Pclass                             Name     Sex   Age  SibSp  Parch  Ticket     Fare Cabin Embarked
    803          804         1       3  Thomas, Master. Assad Alexander    male  0.42      0      1    2625   8.5167   NaN        C
    755          756         1       2        Hamalainen, Master. Viljo    male  0.67      1      1  250649  14.5000   NaN        S
    644          645         1       3           Baclini, Miss. Eugenie  female  0.75      2      1    2666  19.2583   NaN        C
    469          470         1       3    Baclini, Miss. Helene Barbara  female  0.75      2      1    2666  19.2583   NaN        C
    78            79         1       2    Caldwell, Master. Alden Gates    male  0.83      0      2  248738  29.0000   NaN        S
    
  • I want to sort the Titanic data according to the cabin class and age in descending order.

    In [7]: titanic.sort_values(by=['Pclass', 'Age'], ascending=False).head()
    Out[7]: 
         PassengerId  Survived  Pclass                       Name     Sex   Age  SibSp  Parch  Ticket    Fare Cabin Embarked
    851          852         0       3        Svensson, Mr. Johan    male  74.0      0      0  347060  7.7750   NaN        S
    116          117         0       3       Connors, Mr. Patrick    male  70.5      0      0  370369  7.7500   NaN        Q
    280          281         0       3           Duane, Mr. Frank    male  65.0      0      0  336439  7.7500   NaN        Q
    483          484         1       3     Turkula, Mrs. (Hedwig)  female  63.0      0      0    4134  9.5875   NaN        S
    326          327         0       3  Nysveen, Mr. Johan Hansen    male  61.0      0      0  345364  6.2375   NaN        S
    

    With Series.sort_values(), the rows in the table are sorted according to the defined column(s). The index will follow the row order.

To user guide

More details about sorting of tables is provided in the using guide section on sorting data.

Long to wide table format

Let’s use a small subset of the air quality data set. We focus on \(NO_2\) data and only use the first two measurements of each location (i.e. the head of each group). The subset of data will be called no2_subset

# filter for no2 data only
In [8]: no2 = air_quality[air_quality["parameter"] == "no2"]
# use 2 measurements (head) for each location (groupby)
In [9]: no2_subset = no2.sort_index().groupby(["location"]).head(2)

In [10]: no2_subset
Out[10]: 
                                city country            location parameter  value   unit
date.utc                                                                                
2019-04-09 01:00:00+00:00  Antwerpen      BE             BETR801       no2   22.5  µg/m³
2019-04-09 01:00:00+00:00      Paris      FR             FR04014       no2   24.4  µg/m³
2019-04-09 02:00:00+00:00     London      GB  London Westminster       no2   67.0  µg/m³
2019-04-09 02:00:00+00:00  Antwerpen      BE             BETR801       no2   53.5  µg/m³
2019-04-09 02:00:00+00:00      Paris      FR             FR04014       no2   27.4  µg/m³
2019-04-09 03:00:00+00:00     London      GB  London Westminster       no2   67.0  µg/m³
../../_images/07_pivot.svg
  • I want the values for the three stations as separate columns next to each other

    In [11]: no2_subset.pivot(columns="location", values="value")
    Out[11]: 
    location                   BETR801  FR04014  London Westminster
    date.utc                                                       
    2019-04-09 01:00:00+00:00     22.5     24.4                 NaN
    2019-04-09 02:00:00+00:00     53.5     27.4                67.0
    2019-04-09 03:00:00+00:00      NaN      NaN                67.0
    

    The pivot() function is purely reshaping of the data: a single value for each index/column combination is required.

As pandas support plotting of multiple columns (see plotting tutorial) out of the box, the conversion from long to wide table format enables the plotting of the different time series at the same time:

In [12]: no2.head()
Out[12]: 
                            city country location parameter  value   unit
date.utc                                                                 
2019-06-21 00:00:00+00:00  Paris      FR  FR04014       no2   20.0  µg/m³
2019-06-20 23:00:00+00:00  Paris      FR  FR04014       no2   21.8  µg/m³
2019-06-20 22:00:00+00:00  Paris      FR  FR04014       no2   26.5  µg/m³
2019-06-20 21:00:00+00:00  Paris      FR  FR04014       no2   24.9  µg/m³
2019-06-20 20:00:00+00:00  Paris      FR  FR04014       no2   21.4  µg/m³
In [13]: no2.pivot(columns="location", values="value").plot()
Out[13]: <AxesSubplot:xlabel='date.utc'>
../../_images/7_reshape_columns.png

Note

When the index parameter is not defined, the existing index (row labels) is used.

To user guide

For more information about pivot(), see the user guide section on pivoting DataFrame objects.

Pivot table

../../_images/07_pivot_table.svg
  • I want the mean concentrations for \(NO_2\) and \(PM_{2.5}\) in each of the stations in table form

    In [14]: air_quality.pivot_table(
       ....:     values="value", index="location", columns="parameter", aggfunc="mean"
       ....: )
       ....: 
    Out[14]: 
    parameter                 no2       pm25
    location                                
    BETR801             26.950920  23.169492
    FR04014             29.374284        NaN
    London Westminster  29.740050  13.443568
    

    In the case of pivot(), the data is only rearranged. When multiple values need to be aggregated (in this specific case, the values on different time steps) pivot_table() can be used, providing an aggregation function (e.g. mean) on how to combine these values.

Pivot table is a well known concept in spreadsheet software. When interested in summary columns for each variable separately as well, put the margin parameter to True:

In [15]: air_quality.pivot_table(
   ....:     values="value",
   ....:     index="location",
   ....:     columns="parameter",
   ....:     aggfunc="mean",
   ....:     margins=True,
   ....: )
   ....: 
Out[15]: 
parameter                 no2       pm25        All
location                                           
BETR801             26.950920  23.169492  24.982353
FR04014             29.374284        NaN  29.374284
London Westminster  29.740050  13.443568  21.491708
All                 29.430316  14.386849  24.222743
To user guide

For more information about pivot_table(), see the user guide section on pivot tables.

Note

In case you are wondering, pivot_table() is indeed directly linked to groupby(). The same result can be derived by grouping on both parameter and location:

air_quality.groupby(["parameter", "location"]).mean()
To user guide

Have a look at groupby() in combination with unstack() at the user guide section on combining stats and groupby.

Wide to long format

Starting again from the wide format table created in the previous section:

In [16]: no2_pivoted = no2.pivot(columns="location", values="value").reset_index()

In [17]: no2_pivoted.head()
Out[17]: 
location                  date.utc  BETR801  FR04014  London Westminster
0        2019-04-09 01:00:00+00:00     22.5     24.4                 NaN
1        2019-04-09 02:00:00+00:00     53.5     27.4                67.0
2        2019-04-09 03:00:00+00:00     54.5     34.2                67.0
3        2019-04-09 04:00:00+00:00     34.5     48.5                41.0
4        2019-04-09 05:00:00+00:00     46.5     59.5                41.0
../../_images/07_melt.svg
  • I want to collect all air quality \(NO_2\) measurements in a single column (long format)

    In [18]: no_2 = no2_pivoted.melt(id_vars="date.utc")
    
    In [19]: no_2.head()
    Out[19]: 
                       date.utc location  value
    0 2019-04-09 01:00:00+00:00  BETR801   22.5
    1 2019-04-09 02:00:00+00:00  BETR801   53.5
    2 2019-04-09 03:00:00+00:00  BETR801   54.5
    3 2019-04-09 04:00:00+00:00  BETR801   34.5
    4 2019-04-09 05:00:00+00:00  BETR801   46.5
    

    The pandas.melt() method on a DataFrame converts the data table from wide format to long format. The column headers become the variable names in a newly created column.

The solution is the short version on how to apply pandas.melt(). The method will melt all columns NOT mentioned in id_vars together into two columns: A column with the column header names and a column with the values itself. The latter column gets by default the name value.

The pandas.melt() method can be defined in more detail:

In [20]: no_2 = no2_pivoted.melt(
   ....:     id_vars="date.utc",
   ....:     value_vars=["BETR801", "FR04014", "London Westminster"],
   ....:     value_name="NO_2",
   ....:     var_name="id_location",
   ....: )
   ....: 

In [21]: no_2.head()
Out[21]: 
                   date.utc id_location  NO_2
0 2019-04-09 01:00:00+00:00     BETR801  22.5
1 2019-04-09 02:00:00+00:00     BETR801  53.5
2 2019-04-09 03:00:00+00:00     BETR801  54.5
3 2019-04-09 04:00:00+00:00     BETR801  34.5
4 2019-04-09 05:00:00+00:00     BETR801  46.5

The result in the same, but in more detail defined:

  • value_vars defines explicitly which columns to melt together

  • value_name provides a custom column name for the values column instead of the default column name value

  • var_name provides a custom column name for the column collecting the column header names. Otherwise it takes the index name or a default variable

Hence, the arguments value_name and var_name are just user-defined names for the two generated columns. The columns to melt are defined by id_vars and value_vars.

To user guide

Conversion from wide to long format with pandas.melt() is explained in the user guide section on reshaping by melt.

REMEMBER

  • Sorting by one or more columns is supported by sort_values

  • The pivot function is purely restructuring of the data, pivot_table supports aggregations

  • The reverse of pivot (long to wide format) is melt (wide to long format)

To user guide

A full overview is available in the user guide on the pages about reshaping and pivoting.